Concrete Pumping Featured Equipment

Featured Equipment

Putzmeister TB 110

With its low unfolding height, the TB 110 is designed for easy setup and operation in congested areas that don’t allow access for large machinery or have height restrictions. The four-section telescopic conveyor provides 106′ 1″ (32.34m) of horizontal reach in heights as low as 15′ 9″ (4.80m), with the usual Putzmeister smooth, surge-free conveying. With six hopper options, it can efficiently remove large volumes and handle a wide variety of materials such as dirt, sand, stone, and gravel. The Telebelt®<.sup> TB 110 is ideal for projects such as wind farms, dams, and bridge decks.

Technical Specifications

Belt Conveyor Specifications

Height & Reach

Number of sections: 4

Conveyor horizontal reach: maximum at 0°: 106′ 1″ (32.34m)

Conveyor horizontal reach: maximum at 30°: 91′ 6″ (27.91m)

Conveyor belt width: 18″ (457mm)

Feed conveyor length: 38′ 0″ (11.60m)

Feed conveyor belt width: 18″ (457mm)

Trunk/end hose length: 15′ 0″ (4.57m)

Discharge height from grade: maximum at 30°: 60′ 2″ (18.36m)

Discharge height from grade: maximum at -15°: -20′ 0″ (-6.11m)

Rated capacity at 0°: main and feed conveyors by minute: 5.00 yd³/min (4.00m³/min)

Rated capacity up to 20°: main and feed conveyors by minute: 3.80 yd³/min (2.90m³/min)

Observed capacity at 0°: main conveyor by minute: 5.00 yd³/min (4.00m³/min)

Observed capacity at 20°: main conveyor by minute: 5.00 yd³/min (4.00m³/min)

Outriggers

Net reach beyond outriggers: at 0°: 100′ 6″ (30.65m)

Net reach beyond outriggers: at 30°: 86′ 0″ (26.23m)

Outrigger spread L – R – front hydraulically rotate out and down: 23′ 1″ (7.05m)

Outrigger spread L – R – rear hydraulically rotate out and down: 26′ 9″ (8.17m)

Outrigger load: Front: 34,395 lbf (153kN)

Outrigger load: Rear: 34,395 lbf (153kN)

Weights: Truck-mounted weights

Concrete Placement, Inc.

113 S. Minnie St

Santa Ana, CA 92701

877.586.5678 toll free

714.832.8446 fax